Buy


We are completely out of stock

SAV OLÉd + SAV MkI Combo (OUT OF STOCK)

SAV MkI + SAV OLÉd special combo offer















Details: SAV OLÉd, SAV MkI.



SAV OLÉd + SAV MkI

Prices quoted include shipping via tracked mail to Spain.
For the rest of the world orders please add a shipping option below.

                                                                   

SAV MkI (OUT OF STOCK)

The SAV MkI is a 3D printer board electronics has been designed and developed using all the great contributions and feedback from the RepRap CloneWars group in Spain. All shortcomings from other similar boards have been addressed providing an affordable yet feature rich 3D printer electronics. The result, the SAV MkI.
We have addressed the main problems and functionality limitations that equivalent electronics have:






            Checkout the details: SAV MkI.

            You can get one from the following reseller:
            Directly from us:

            SAV MkI RevD.1

            Prices quoted include shipping via tracked mail to Spain.
            For the rest of the world orders please add a shipping option below.

                                                                              


            SAV OLÉd (OUT OF STOCK)
            The SAV OLÉd is perfect for your SAV MkI and 3D printer. While the form factor is small, its a full blown 128x64 OLED LCD controller. It's fast and reliable.

            While this LCD has been designed for a RepRap printer, it can also be retro fitted to any project that may require a user interface as it is supported directly by the u8glib.


            This module does not have an SD reader as this feature is provided by the SAV MkI, making the LCD interface more reliable and glitch free. The module connects to the main controller using a 14 wire ribbon cable using a 3M box connector. The LCD has been tested with a 1.5m ribbon cable without glitches. The entire LCD is controlled through it's I2C interface.






            Check out the details: SAV OLÉd.


            SAV OLÉd

            Prices quoted include shipping via tracked mail to Spain.
            For the rest of the world orders please add a shipping option below.

                                                                              

            SAV 3D LCD (OUT OF STOCK)

            The SAV 3D LCD is the perfect companion for your SAV MkI and 3D printer.
            The SAV 3D LCD is an LCD with rotary encoder with click button and 2 push buttons to control your LCD. It allows the control of a 3D printer running Marlin firmware and a SAV MkI, sanguinololu, printrboard or similar electronics directly without having to have a computer connected.






            Checkout the details: SAV 3D LCD.

            You can get one from the following reseller:

            SAV 3D LCD
            Prices quoted include shipping via tracked mail to Spain.
            For the rest of the world orders please add a shipping option below.

                                                                                

            Mini heat-bed (OUT OF STOCK)
            Mini heatbed for the Lewihe Play or the Printrbot Play. If you want to upgrade your mini printer and be able to print more demanding filaments such as ABS this accessory is for you.

            Fully assembled heatbed.

            Size: 100x100 mm
            Rated voltage: 12V
            Maximum operational temperature: 150ºC
            Power dissipation:

            • 69W aprox: 12V @25ºC, 50W aprox: 12V @110ºC




            Checkout the details: Mini heat-bed.


            Mini heatbed for Play

            Prices quoted include shipping via regular mail to Spain. For registered mail to Spain and the rest of the world orders please add a shipping option below.

                                                                                

            arduCHIP (OUT OF STOCK)
            The arduCHIP is electroFUN's minimal design approach to a bare bones Arduino compatible board. It requires a 4.5-5.5V regulated power source being the perfect companion for the arduSTAMP. It comes pre-programmed with a bootloader. The serial interface is fully compatible with the USB breakout board of the arduSTAMP or with sparkFun's FTDI basic. 
            You can get the arduCHIP in 2 assembly options:

            • full assembled arduCHIP - a fully assembled arduChip without header connectors (only ICSP and serial headers will be fitted).

            Assembly Options

            Please read our product description here.
            Prices quoted include shipping via regular mail within the EU.
            For non EU orders please add a shipping option below.



                                                                                  

            Shipping Options
            If you are not in Spain don't forget to add your shipping options.

            Free shipping of our boards is included via regular mail within Spain. 

            Should you wish to have your boards sent urgently or to any other country outside of the EU, please add to your cart one of the shipping options below:



            Shipping - Envío



                                                                                


            Shopping Cart





            If by chance what you are looking for is not in stock, do drop us a line and we will get back to you as soon as we have replenish the stock: info@electrofunltd.com.

            We apologize for the inconvenience.